Move-in and move-out inspections
Walk through a lot on your phone, room by room, with notes and photos, then you and the tenant sign the report.
Updated
Starting one
Open the lease and, under Move-in and move-out, press Start the move-in inspection. You can also start one from Buildings, Compliance, Inspections, with Start an inspection: pick the lease and which end of the tenancy it is.
The rooms are proposed from what the lot is: its kind, and how many bedrooms and bathrooms it has. Each room comes with the parts worth looking at: walls, floor, ceiling, windows, doors, lights and sockets, and the appliances, taps and fittings or heating where a room has them. Add a room, rename one or remove it, and do the same with the items in a room.
Walking through
Open a room and give every item a condition: Good, Fair, Worn, Damaged or Missing. Add a note where it helps, and photos: Take a photo opens the camera, Choose a photo picks one you already took. Photos are made smaller on the phone before they are sent.
Everything is saved as you go. If the connection drops, the page says Not saved yet and keeps trying while it is open, and a photo waits on the phone until it can be sent. Leaving the page with something not yet saved asks you first.
Meters and keys reads the lot's own meters, with the last reading on file beside each, and counts the keys handed over by kind. Meters are added on the lot itself.
Finishing
Review and finish shows what was recorded and any item still to look at. Every item needs a condition before the report can be drawn. Finish and draw the report writes a PDF in the language of the lease: the property, the landlord and the tenant, the date and the town, every room with each item's condition, note and photos, the meter readings and the keys. It is filed on the lease and on the lot.
To correct a finished report before anyone has signed it, use Reopen to correct it in the report's menu. The first report stays on file, marked as no longer current.
Signing
Both of you sign the report through the same signing as a lease: leases and contracts. Sign here, on this phone lets each person sign in turn on your phone: press Sign now beside their name and hand them the phone. Send to sign by email sends each of you a link instead. Either way, each signer types their name and a code sent to their own email address, so a tenant with no email address on file cannot sign until one is added.
Once everyone has signed, the report is filed again with its certificate of signature at the end, on the lease and the lot, and the inspection reads Signed by both sides.
Move-out
A move-out inspection comes filled in from the move-in: the same rooms and items, with what was recorded at move-in shown beside each one. Nothing counts as looked at until you look at it. Any item recorded in a worse condition than at move-in is listed under Changed since move-in, with the photos from both visits, on screen and in the report.
That list states facts. Dardaris does not say who is responsible for a change, does not price it and does not take anything from the deposit: what follows from the report is yours to decide. The deposit and the end of the tenancy are on the lease: ending a lease.